Air condensers

They are devices in which the condensation of a refrigerant gas is produced in a direct expansion system, passing to liquid phase through a process of energy transfer, after a thermodynamic process. These mechanisms must be developed by a team of professionals, thanks to which, designs are achieved with materials and structures of high rigidity to ensure the quality of refrigeration condensers.

These are used for industrial cooling, but also in air conditioning equipment, among others. Refrigeration condensers remove the heat that the refrigerant medium has when passing through it. Their designs are very varied and differ depending on the need for which they are created.

Air condensers for refrigeration also produce heat, which is transferred from the internal fluid to the air passing through them.

Interested?

Inditer's Industrial Refrigeration Air Condensers

There are different types of air condensers for refrigeration, depending on the medium used. There are air cooled air condensers, which require air to operate, and water cooled air condensers, which are usually the most compact. All of them are very useful in the cooling processes of various household appliances and in industry.

Air cooled condensers for air cooling are used for lower power installations. The water ones must in turn recover their enthalpy level after extracting the energy from the refrigerant, in order to be used again.

There are different aspects that must be taken into account when buying aerocondensers:
– They must have the right size.
– They must provide for the speed with which the gas will move inside.
– They must have the ability to control the temperature difference of the cooling medium.

As for the size of the cooling air condensers, it is important that it fits the conditions you need, because if it is too small it may fail or not properly remove heat, and if it is too large you will be underutilizing its reaction capacity.

INDITER develops high quality aero type evaporators and air condensers, with which you can respond to any company. We are backed by more than a decade of production, implementing the best technologies and innovating designs for all your needs.

Range standards:

Available in table type (vertical/horizontal air flow) or V type, in single or double line of fans.
Structure for mounting on leveled bedplate, anti-vibration mounts recommended (not included).
Chassis and casing made of galvanized steel sheet, treated for installation in INTEMPERIE by application of Thermosetting Polyester type Polymer with High Resistance to Ultraviolet Radiation and Corrosion, RAL 7004.
THERMAL EXCHANGERS made of copper tubes and aluminum fins with “V-BAFLE” type profile. Copper collectors, solder connection.
Pressurized exchanger with closed connections and howitzer located at the outlet connection.
Design pressure (PS) 42 bar
Suitable for all refrigerants, HFC, HFCO, and A2L.
Axial fans with high efficiency aerodynamic blades and AC motor, IP54 protection degree and protection grill.
Power supply voltages I-230 50Hz, III-400v, 50Hz
Terminal box for fan power supply located on the side of the equipment.

Optionals available:

Connections on both sides
Different fin materials according to corrosive environment:
- Aluminum fin coated with blue polyurethane
- Aluminium-magnesium alloy fin
- Copper fin
- Anticorrosive paint treatment
Fin pitches available 2.1mm – 4mm
Protective grid for exchange surface
Electronic EC fans
Low noise level fans
Fan-operated maintenance disconnecting switch
Control of fan regulation according to condensation pressure:
- Proportional control with EC fans
  - Modbus communication (RS-485 / TCP-IP)
  - BACnet communication
- Partialization of fans with AC fans
Packing with phytosanitary wooden cage for export (on request)