Heat exchangers
Inditer S.A. has a wide range of exchange equipment for different applications. INDITER, S.A. is a company dedicated mainly to the production and commercialization of a wide range of exchange equipment for different applications, solar/climate air heaters, drycoolers and remote condensers. It was founded in 2005 by a group of professionals with extensive experience in the refrigeration and air conditioning sector.
Interested?
Inditer heat exchangers
We manufacture tube and fin heat exchangers for all applications:
– Exchangers air water, glycol, Oil, temper…
– Direct expansion exchangers, HFC, CO2, NH3, NH3…
– Exchangers for HFC condensation, subcritical CO2, transcritical CO2, CO2 transcritical…
Different forms of heat exchangers:
– Coils in 5/8″ mm (15.875 mm) copper tubes
– L-bent exchangers
– U-bent exchangers
– Exchangers cut at 60º of inclination
Geometries
| Code Inditer | Tube Pitch (mm) | Row pitch (mm) | Tube Ø (mm) |
|---|---|---|---|
| 0722 | 25 | 21.65 | 7 |
| 1022 | 25 | 21.65 | 9.52 |
| 1227 | 31.7 | 27.5 | 12 |
| 1630 | 60 | 30 | 16 |
| 1635 | 40 | 34.64 | 16 |
Types of connections
| WING | TUBE | CHASSIS | COLLECTOR | |
|---|---|---|---|---|
| Aluminum | X | X | ||
| Aluminum + polyurethane | X | |||
| Aluminum magnesium | X | X | ||
| Copper | X | X | X | |
| Carbon steel | X | |||
| Galvanized steel | X | |||
| Stainless Steel | X | X | X |
Materials
| Connection type | Copper collector | Carbon steel manifold | Stainless steel manifold |
|---|---|---|---|
| Weld | X | X | X |
| Threaded | X | X | X |
| Flange | X | X | X |
| Victaulic | X | ||
| Venturi distributor | X | X |
Features
FINS
INDITER S.A. batteries are manufactured with aluminum fins, aluminum with polyurethane coating, copper or special alloys of high corrosion resistance, with different thicknesses depending on the application, corrugated fins, with grooves and curled edges (“V-Baffle” type) to improve the exchange coefficient and optimize the performance.
COLLECTORS AND DISTRIBUTORS
The collectors can be supplied in copper for the evaporator and condenser coils, and in steel collectors according to UNE EN 10255 for the water coils. The liquid distributors for the evaporator coils are of the Venturi type, made of brass, allowing an equal refrigerant supply through the circuits.
BASTIDORES
Constructed in galvanized steel, aluminum or stainless steel sheet with deep drawing, to avoid sharp contact surfaces that may damage the pipes.
FINS
INDITER S.A. batteries are manufactured with aluminum fins, aluminum with polyurethane coating, copper or special alloys of high corrosion resistance, with different thicknesses depending on the application, corrugated fins, with grooves and curled edges (“V-Baffle” type) to improve the exchange coefficient and optimize the performance.
COLLECTORS AND DISTRIBUTORS
The collectors can be supplied in copper for the evaporator and condenser coils, and in steel collectors according to UNE EN 10255 for the water coils. The liquid distributors for the evaporator coils are of the Venturi type, made of brass, allowing an equal refrigerant supply through the circuits.
BASTIDORES
Constructed in galvanized steel, aluminum or stainless steel sheet with deep drawing, to avoid sharp contact surfaces that may damage the pipes.
| Dimensions | Fin | Tube | |||||
|---|---|---|---|---|---|---|---|
| GEOMETRY | D | A | B | Corrugated | Plana | Smooth | Grooving |
| 7 | 7 | 25 | 21.65 | – | – (1) | – | – |
| 3/8″ | 9.52 | 25 | 21.65 | – | – (1) | – | – |
| 12 | 12 | 31.75 | 27.5 | – | – | – | |
| 5/8″ | 16 | 60 | 30 | – (1) | – | ||
| 5/8″ | 16 | 40 | 36.64 | – (1) | – | ||
